Common Dishwasher Problems: A UK Troubleshooting Checklist for Cleaning, Draining and Drying Faults
dishwasher maintenancedishwasher troubleshootingdishwasher not drainingdishwasher not dryingappliance repairs

Common Dishwasher Problems: A UK Troubleshooting Checklist for Cleaning, Draining and Drying Faults

KKitchenSet Editorial Team
2026-11-17
6 min read

A practical UK dishwasher troubleshooting checklist for cleaning, drainage, drying, error codes, safe checks and knowing when to call an engineer.

A dishwasher that leaves food behind, holds dirty water or finishes with wet dishes is often showing a problem you can check safely at home. This practical UK dishwasher troubleshooting checklist explains what to inspect first, when a replacement part may help and when to stop and call a qualified engineer.

Overview

Dishwasher performance usually depends on a small group of connected factors: water flow, spray-arm movement, filtration, detergent, loading and drainage. Before assuming the appliance has failed, work through the simple checks in a consistent order. Always switch the dishwasher off before removing filters, touching internal parts or investigating a hose. If you need to move an integrated appliance, isolate the electricity and water supply first, and do not work on live electrical components.

The appliance manual remains the best reference for model-specific cleaning instructions, programme settings and dishwasher error codes. Error codes are not universal: the same symbol or number can mean different things between manufacturers and generations. Record the exact code, model number and symptoms before searching for a solution or ordering a part.

SymptomLikely checksSafe first action
Dishes are still dirtyBlocked filters, obstructed spray arms, poor loading, unsuitable programme or insufficient detergentClean the filter, check spray-arm holes and run a correctly loaded cycle
Dishwasher is not drainingDirty filter, blocked sump area, kinked drain hose or a connection problem under the sinkCancel the programme, isolate the appliance and inspect accessible areas
Dishes are wetProgramme choice, rinse aid, overloaded racks, plastic items or a heating faultCheck rinse aid and drying settings, then compare results on a suitable programme
Water remains in the baseFilter or drain restriction, blocked waste connection or pump faultRemove standing water only as instructed by the manual; do not dismantle the pump
Error code appearsWater inlet, drainage, heating, door-lock or sensor issueNote the code, check the manual and follow only the manufacturer’s reset guidance
Water leaks from the doorDamaged or dirty seal, trapped item, poor levelling or excess foamStop the cycle, isolate the appliance if necessary and inspect the seal

Checklist by scenario

When the dishwasher is not cleaning properly

  1. Check the filter. Remove and rinse the filter system according to the manual. Food residue, grease and labels can restrict water circulation. Clean the surrounding area with a soft cloth rather than forcing anything into the pump opening.
  2. Spin the spray arms. They should rotate freely. Remove the arms only if the manual permits it, then rinse blocked holes under the tap. Do not enlarge the holes with a sharp object, as this can alter the spray pattern.
  3. Review loading. Large plates, chopping boards or pans can block the lower arm. Tall items may prevent the upper arm from turning, while tightly nested bowls stop water reaching their surfaces. Place dirty faces towards the spray and avoid overcrowding.
  4. Check detergent and programme choice. Use detergent intended for automatic dishwashers and follow the product and appliance instructions. A short or low-temperature programme may not suit baked-on food. Do not use washing-up liquid, which can create excessive foam.
  5. Confirm water supply and temperature. Make sure the inlet tap is open and the inlet hose is not kinked. If the machine fills but washing remains weak, an inlet, circulation or heating fault may require professional attention.

When the dishwasher is not draining

  1. Cancel the programme using the controls described in the manual and wait for the appliance to finish its safe cancellation sequence.
  2. Switch off the dishwasher and isolate it before removing the filter or checking the base.
  3. Clean the filter and look for obvious debris around the accessible sump area. Use gloves because broken glass or sharp food packaging may be present.
  4. Under the sink, check that the drain hose is not kinked, crushed or pulled into a position that restricts flow. If the dishwasher connects to a sink waste or disposer, check that the connection is appropriate and unobstructed.
  5. Run a rinse or drain programme only after reassembling the filter correctly and confirming that there is no leak. Persistent standing water, a humming pump or repeated drainage errors indicate that an engineer may be needed.

When the dishwasher is not drying dishes

Some moisture is normal, particularly on plastic items and after shorter programmes. First check that the selected cycle includes drying or that the machine’s drying option has not been disabled. Refill rinse aid if your model and detergent instructions support its use, and avoid blocking the door’s steam outlet. Open the door carefully at the end of the cycle if the manual recommends it, allowing hot vapour to escape.

If every item remains cold and wet, the cycle ends unusually early or an error code appears, there may be a heating, sensor or control fault. Do not test internal heating components yourself unless you are suitably qualified.

What to double-check

  • Door seal: Wipe away grease and check for splits, distortion or food trapped along the seal. A damaged seal should be replaced with the correct model-specific part.
  • Levelling: An appliance that is not level may affect door closure, water distribution or drainage. Adjust only the accessible feet and follow the installation instructions.
  • Inlet hose: Look for kinks, crushed sections or signs of leaking. Do not remove a secured water connection unless you know how to isolate it safely.
  • Drain hose routing: The correct high loop or connection arrangement depends on the installation. Follow the manual rather than copying an arrangement from another appliance.
  • Water hardness settings: In hard-water areas, the appliance may need the correct salt and rinse-aid settings. Check the manual and detergent instructions; do not guess the dosage.
  • Error codes: Write down the code before resetting. A reset may clear a temporary interruption but will not repair an underlying fault.

Common mistakes

Adding extra detergent does not necessarily improve cleaning and can leave residue or create excess foam. Mixing cleaning products is also unsafe. Avoid pouring drain cleaner into a dishwasher unless the manufacturer specifically instructs it; unsuitable chemicals can damage seals, hoses and internal components.

Do not run repeated cycles with a blocked filter, force a spray arm, pull an integrated dishwasher out without preparing the connections or keep using the appliance after a leak. Never bypass a door switch, remove electrical covers or probe wiring. If there is a burning smell, smoke, sparking, a hot cable, a major leak or water near an electrical connection, isolate the appliance if safe and seek qualified help.

Replacement filters, seals, spray arms and hoses can often be model-specific. Confirm the full model number and part compatibility before buying. If the repair involves the pump, heater, control board, wiring or concealed plumbing, compare the likely repair cost and appliance age with the cost of replacement, but leave diagnosis and electrical work to a qualified engineer.

When to revisit

Return to this checklist whenever wash results deteriorate, a new error code appears, the dishwasher has been unused for an extended period or you change detergent, rinse aid or programme habits. A quick filter and spray-arm inspection is useful as part of a regular kitchen cleaning routine; more detailed servicing should follow the manufacturer’s schedule.

Recheck the manual when the appliance is moved, a hose is replaced or settings are changed. Manufacturer instructions, error-code lists and compatible replacement parts can differ between models, so use the current documentation for your exact dishwasher. If the same fault returns after cleaning and correct loading, stop repeating resets and arrange a qualified inspection. A clear record of the symptom, code, recent checks and any visible leak will help the engineer diagnose the problem efficiently.

Related Topics

#dishwasher maintenance#dishwasher troubleshooting#dishwasher not draining#dishwasher not drying#appliance repairs
K

KitchenSet Editorial Team

Kitchen Appliances Editor

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.